PASSWORD RECOVERY NEXUS

User Access Verification

login: BP

Password:

Login incorrect

User Access Verification

login: admin

Password:

 Login incorrec

User Access Verification

 RE-BOOT  CON PASSWORD RECOVERY  NEXUS 7000

User Access Verification

RPRATM-BNL-CORE login:

NX7 SUP Ver 3.22.0

Default Serial Port Parameters

PMCON_1: 0x200

PMCON_2: 0x4

PMCON_3: 0x6

PM1_STS: 0x101

Performing Memory Detection and Testing

Total mem found : 8192 MB

Performing memory test... Passed.

NumCpus = 2.

 Time: 55/105/2000  1:70:26

Nanosecond: 0 TimeZone: 2047

Reseting Invalid time to 1/1/2008 0:0:0

 

 

Status 61: PCI DEVICES Enumeration Started

Status 62: PCI DEVICES Enumeration Ended

Status 9F: Dispatching Drivers

Status 9E: IOFPGA Found

Status 9A: Booting From Primary ROM

Status 98: Found Cisco IDE

Status 98: Found Cisco IDE

Status 98: Found Cisco IDE

Status 90: Loading Boot Loader

 

Reset Reason Registers: 0x0 0x10

 Filesystem type is ext2fs, partition type 0x83

              GNU GRUB  version 0.97

 

Autobooting bootflash:/n7000-s1-kickstart.6.1.1.bin bootflash:/n7000-s1-dk9.6.1.1.bin...

 Filesystem type is ext2fs, partition type 0x83

Booting kickstart image: bootflash:/n7000-s1-kickstart.6.1.1.bin....

..............................................Aborting Image Boot  ß PREMENDO CTRL-C per I 7K (CTRL-R per I 5K)

 

              GNU GRUB  version 0.97

                Loader Version 3.22.0

 

loader> boot n7000-s1-kickstart.6.1.1.bin   <------------------------------- BOOTING KICKSTART

 Filesystem type is ext2fs, partition type 0x83

Booting kickstart image: n7000-s1-kickstart.6.1.1.bin........................................................

...................Image verification OK

 

INIT:

Checking all filesystems....r.. done.

Loading system software

INIT: Sending processes the TERM signal

INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
 

switch(boot)# config terminal

Enter configuration commands, one per line.  End with CNTL/Z.
switch(boot)(config)# ?

Configure commands::

  admin-password  Set password for admin

  do              EXEC command

  end             Exit from configure mode
  exit            Exit from configure mode
  interface       Select an interface to configure
  ip              Configure the ip parameters
  no              Negate a command or set its defaults

 

 

 

switch(boot)(config)# admin-password BPxxxxxxch

WARNING! Enabling local authentication for login through console due to password

 recovery

switch(boot)(config)# exit

 

switch(boot)# dir bootflash:

       522  Jan 01 2008 01:27:22  JAF1626APQQ_183875044.lic

       16384  Jan 01 2008 01:21:39  lost+found/

       208476721  Jan 01 2008 01:26:16  n7000-s1-dk9.6.1.1.bin         <---------------  NX-OS

       30035968  Jan 01 2008 01:24:54  n7000-s1-kickstart.6.1.1.bin  

       4096  Jan 01 2008 01:34:34  vdc_2/

       4096  Jan 01 2008 01:34:34  vdc_3/

       4096  Jan 01 2008 01:34:34  vdc_4/

 

Usage for bootflash: filesystem

  366526464 bytes used

 1486589952 bytes free

 1853116416 bytes total

switch(boot)# load bootflash:n7000-s1-dk9.6.1.1.bin

 

login: admin

password: BPxxxxxxch

 

copy running-config startup-config

 

 

 

note: ho sfilato la seconda sup .. perchè diventava attiva e non mi permetteva di eseguire il

password recovery con successo